Login|Register|Forget password|Dashboard Back to Home|Contact|Shopcart
Unverified1st Year

Shenzhen Eelink Communication Technology Co., Ltd.  

Search
新闻中心
  • 暂无新闻
产品分类
  • 暂无分类
联系方式
  • 联系人:Lindy
  • 电话:86-755-86278376
  • 传真:86-755-86258387
站内搜索
 
荣誉资质
  • 暂未上传
友情链接
  • 暂无链接
首页 > Products > 3G/4G High Qulified GPS Tracker for Fleet Management
3G/4G High Qulified GPS Tracker for Fleet Management
单价 $39.00 / Pieces对比
询价 暂无
浏览 187
发货 Chinaguangdongshenzhen
库存 1Pieces
过期 长期有效
更新 2020-04-04 15:45
 
详细信息
Product Name: 3G/4G High Qulified GPS Tracker for Fleet Management Model NO.: TK319-H Model Number: Tk319-H Voltage: 9-72V Color: Black/Red GSM Frequency: 850/900/1800/1900MHz WCDMA Frequency: W800/W850/W900/W1900/W2100MHz Weight: 50g Battery Capacity: 140mAh IP Level: IP65 Dimensions: 89(L)X37(W)X 12(H) Type: GPS Tracker Transport Package: Standard Package Specification: PTCRB, GCF, FCC, IC, R&TTE, RCM, CCC, Giteki, Origin: Shenzhen, China HS Code: 8526911000 Product Description Product FeaturesTK319-H acts like a 3G modem and responds to AT commands issued to it from either aphysical UART port connection or to AT commands issued to it through an SMS, TCP/IPor UDP/IP connection. With regard to text messages, TK319-H "reads" all of its own text messages and tries to interpret each message as an AT command. SMS text may be sent to a TK319-H through any CSD SMS connection.Key superset functions outside that of typical UMTS/HSPA modems support intrinsic TK319-H Features. These functions include:Typical Application IndustryØ Logistics EnterprisesØ Car Rental CompanyØ Logistics DistributionØ Intelligent TransportationØ Safety SupervisionAlarm TypeØ Vibration AlarmØ Collision / falling AlarmØ Speed AlarmØ Geo-fence AlarmProduct Specification Main SpecificationsGPS Chip UBLOX GPS, GNASS ChipAntenna Built-in GPS Patch antenna; UMTS/HSPA antennaGPS Positioning Accuracy5m-15m(Depend GPS signal)LBS Positioning Accuracyabout 200m (Depend bases Density)GPS FrequencyL1,1575.42MHz C/A codeNetworkUMTS/HSPA, GSM, GPRS, EDGEFrequency bandsUMTS/HSPA 800/850/900/1900/2100 MHzGSM850/1900 and 900/1800MHz Quad-bandGPRS Class 12, TCP/IPLED indicator GPS- Blue; GSM- RedMemory 4MB for application and data storageHot/warm/cold Start<3s,<15s,<60sBuilt-in BatteryEmbedded 150mAh battery for emergency alarmStandby4hoursWork Current<30 mAStandby Current<15 uACharger 5VDC/1AIP Waterproof LevelIP65Dimensions (mm)89mm x 37mm x 12mmOperating Voltage9-72V DCEnvironment Temperature-20 to 75° C Operation-50 to +100° C StorageEnvironment Humidity20% to 90% Operation10% to 95% StorageNetWeight50 gCertifications: PTCRB, GCF, FCC,IC, R&TTE RCM, CCC, Giteki, Anatel, AT&T Rogers (all planned)InstallationThe TK319-H vehicle tracking device must be installed in a vehicle in such a way it has an unobstructed view of the sky during normal operation. If needed, use a double sided foam tape to secure the surface not facing the sky.In addition to the above features, TK319-H comes with the provision to add a motion detector to the main board that can be used to wake the device from a very low power state.Advanced Data Reporting CapabilitiesThe TK319-H vehicle tracker consists of two piece of plastic enclosure which is waterproof IP65 for reliability, durability and low-cost assembly. The GPS patch and UMTS/HSPA antenna are placed internal to the device. The tracker itself can initiate data reporting through UMTS/HSPA's SMS, TCP/IP or UDP pathways or over a physical UART connection. Network provisioning is done using SIM technology for reliability and cost saving. The TK319-H can be provisioned for TCP/IP, UDP and SMS data services for application command and data transactions within the 850, 900, 1800 and 1900 MHz GSM bands and 800,850,900,1900 and 2100MHz UMTS/HSPA bands.A hardware TK319-H endpoint reset and reboot is initiated for added safeguard against network connection loss. This can be done by simply calling the provisioned phone number and allowing it to ring three times.Over The Air (OTA) application firmware updates are supported through at TFTP connection to a server. The high-level application image can be updated by using one specialized SMS or UART command.